NEW JOURNEY
Product Description
Increasing reserve changes both the aircraft payload budget and the ground charging schedule. The 6S 120Ah UAV Battery has a maximum charge current of 60A and a 25.8V charge cutoff, alongside a 400mm body height. Those values make it useful to assess charging equipment, battery access and mission reserve as one installation, rather than selecting by capacity alone.
Technical Specifications
| Parameter | Specification |
|---|---|
| Model | 6S120Ah |
| Cell designation | 120118356-120000mAh |
| Cell type | Semi solid |
| Series configuration | 6S |
| Nominal voltage | 21.0V |
| Capacity | 120Ah / 120000mAh |
| Nominal energy | 2520Wh (nominal voltage × capacity) |
| Cell energy density | 400Wh/kg (cell value) |
| Maximum charge current | 60A (0.5C) |
| Charge cutoff voltage | 25.8V |
| Discharge cutoff voltage | 15.0V at T ≥ 0°C; 13.2V at T < 0°C |
| Continuous discharge current | 240A (2C) |
| Maximum discharge current | 360A (3C), 10 seconds, SOC > 50% |
| Condition | Specification |
|---|---|
| Working temperature | -40 to 55°C |
| Storage temperature | -20 to 40°C |
| Storage humidity | <85% RH |
| Cycle-life reference | 500 cycles |
| Mechanical item | Specification |
|---|---|
| Body dimensions (W × T × H) | 85 × 125 × 400mm; each ±5mm |
| Approximate body weight | 6.6kg |
| Optional interface | Configuration |
|---|---|
| Main cable and connector | 4AWG, 150mm; QS10 |
| Balance harness and connector | 22AWG, 150mm; XH-7P (B0–B6) |
Operating-temperature limits do not by themselves define permitted charging temperatures. Apply the approved charging profile, load conditions and finished-harness limits for the ordered configuration.
Product Details
Mission Reserve
For a 6S 120Ah battery pack, compare outbound and return energy, payload changes and the required reserve. Evaluate the installed mass and recharge time alongside capacity so that the selected battery fits the complete operating schedule.
Electrical Acceptance
Outgoing checks include dimensions, capacity and voltage stability. For a customized 6S 120Ah semi solid battery, agree the test conditions and acceptance criteria before the sample is approved, then retain results linked to the ordered configuration.
Resting and Loaded Voltage
A resting-voltage check helps compare the initial state of the packs. Voltage measured during a load test answers a different question: how the complete battery responds at that current and temperature. A useful acceptance record states the test current, observation time and limits, so later batches can be compared under the same conditions.
Keep batch energy checks comparable
Agree the charge profile, discharge current and cutoff used for capacity acceptance before comparing deliveries. Record finished dimensions and voltage observations against the same reference build. A result obtained under a different test setup should not be treated as a direct batch comparison.
Production and Handling Context
Prepare a Product Enquiry
Share mission energy demand, allowable battery mass and the time available for charging. New Journey can quote the 120Ah configuration with a clear basis for the sample evaluation and any later bulk order.
Compare 6S 120Ah UAV Battery with related models
| Selection point | 6S 120Ah UAV Battery | 6S 16000mAh UAV Battery | 6S 22000mAh UAV Battery |
|---|---|---|---|
| Nominal voltage | 21.0V | 22.2V | 22.2V |
| Nominal energy | 2520Wh (nominal voltage × capacity) | 355.2Wh | 488.4Wh |
| Cell energy density | 400Wh/kg (cell value) | 270Wh/kg cell value | 350Wh/kg individual-cell value |
| Charge cutoff voltage | 25.8V | 25.2V | 25.5V |
| Discharge cutoff voltage | 15.0V at T ≥ 0°C; 13.2V at T < 0°C | 15.0V | 15.0V |
FAQ
What information helps decide between 120Ah and 150Ah before I order?
Ask New Journey to review the selected battery against your allowable mass, usable bay dimensions, required continuous current and charging resources. Include route power records and reserve requirements. The larger option should solve a demonstrated constraint, not simply increase the capacity number.
What charger information is needed for this battery?
Charge cutoff voltage: 25.8V; Maximum charge current: 60A (0.5C). The charger must support this series count and the ordered balance connection. A similar S-count label on a different chemistry does not establish the same charge ceiling.
How much installation space should I allow for this battery?
Body dimensions (W × T × H): 85 × 125 × 400mm; each ±5mm; Approximate body weight: 6.6kg. The battery bay also needs space for the cable exits, connectors and restraint. Support the battery body independently of its wires; the body envelope does not include every installation clearance.
Which connection details should be fixed for this battery?
Main cable and connector: 4AWG, 150mm; QS10; Balance harness and connector: 22AWG, 150mm; XH-7P (B0–B6). Main power and balance connections serve different purposes. Keep the pinout and polarity tied to the ordered harness, and approve the connector and wire limits for the actual load; a matching plug shape is not a current rating.
