NEW JOURNEY
Product Description
Battery access matters when a large pack is removed between operating cycles. The reference assembly includes a handle, a main power connection and a separate balancing interface. Check the space above the pack as well as the 210 x 92 x 62mm body envelope. The handle helps handling; the aircraft still needs a suitable battery restraint.
Specification for Configuration Review
| Parameter | Specification / qualification |
|---|---|
| Source model | JSN11090190-Q1 |
| Product form | Finished pouch-cell battery pack |
| Nominal voltage | 22.2V |
| Rated capacity | 40Ah |
| Nominal energy | 888Wh (calculated from nominal voltage and rated capacity) |
| Configuration | 6S1P; six 40Ah cells |
| Charge ceiling | 25.5V |
| Standard / maximum charge | 20A / 40A |
| Discharge endpoints | 15.0V above 0°C; 13.8V at or below 0°C |
| Source maximum continuous discharge | 200A (5C); complete assembly limit to be approved |
| Maximum body size | 210 x 92 x 62mm (L x W x T) |
| Reference pack mass | 2590g |
| Power / balance connection | XT90-S, 8AWG / JST-XH 7-position, 22AWG |
| Lead lengths | Main 150 ± 10mm; balance 90 ± 6mm |
| Handling / wrap | One handle in BOM; black PVC |
| Pack impedance | ≤20mΩ at 1kHz |
Dimensions and connections
Technical views based on the dimensions in this product specification. Open either drawing to inspect the vector detail.
Dimensions and assembly scope
The 40Ah semi-solid drone battery BOM includes one handle. The 210 x 92 x 62mm maximum body dimensions do not describe every free cable or raised handle position. The aircraft mounting arrangement should support the battery body without relying on its lead exit.
The 6S charging reference
A 22.2V 40000mAh UAV battery in this source uses a 25.5V charge ceiling. That differs from a conventional 25.2V 6S LiPo setting. Standard charge is 20A and the listed maximum is 40A; use an approved charger profile for the selected build.
Power and balancing follow different paths
The JSN11090190-Q1 battery drawing specifies 8AWG main leads, an XT90-S power connector and a seven-position JST-XH balance plug using 22AWG wire. Main lead length is 150 ± 10mm; the balance lead is 90 ± 6mm. Confirm mating parts and polarity with the aircraft.
Current capability belongs to the complete assembly
This 6S semi-solid battery pack lists 200A maximum continuous discharge in the source. The finished connector and harness must be separately qualified for the intended load and temperature. A source C-rate is not evidence that the pictured plug can carry every stated current continuously.
Related production and handling
The accompanying workbench photograph shows related pouch-battery assembly activity. The handle, power lead and balancing connection on the ordered 40Ah pack follow the selected assembly drawing.
Prepare a Product Enquiry
Request the 6S 40Ah pack with the aircraft mounting drawing and permitted handling space. Review the handle clearance, cable route and complete power-path rating before confirming the sample configuration.
Compare 6S 40000mAh Semi-Solid UAV Battery with related models
| Selection point | 6S 40000mAh Semi-Solid UAV Battery | 8S 40000mAh Solid State UAV Battery |
|---|---|---|
| Nominal voltage | 22.2V | 29.6V |
| Nominal energy | 888Wh (calculated from nominal voltage and rated capacity) | 1184Wh, calculated from 29.6V x 40Ah |
FAQ
Is this the same item as a 40Ah bare cell?
No. The source has a six-cell BOM, pack drawing, power lead, balance connection and handle. This page describes that finished 6S configuration.
Can the handle replace the airframe restraint?
No. The handle is for handling the pack; the aircraft needs an approved retention arrangement that supports the battery body.
Why is the charging ceiling 25.5V?
That is the value stated for this semi-solid reference. Use its approved charging procedure rather than assuming the normal setting for a different 6S chemistry.
How can buyers request samples or a batch quotation?
Provide the airframe battery bay, permitted mass, mission current, charger details and quantity. New Journey can review the final connector and delivery requirements before quoting.
