NEW JOURNEY
Product Description
A shallow battery bay makes body thickness as important as capacity. The 6S 12Ah assembly has a maximum 55mm thickness and a 185 x 83mm footprint. Leave room beyond that envelope for the main connector and balance lead, then check how the restraint supports the battery during aircraft movement.
Technical Specifications
| Parameter | Specification / qualification |
|---|---|
| Source model | JS8880165, 22.2V pack reference |
| Product form | Finished pouch-cell battery pack |
| Nominal voltage | 22.2V |
| Rated capacity | 12Ah |
| Nominal energy | 266.4Wh (calculated from nominal voltage and rated capacity) |
| Series / parallel | 6S1P |
| Normal charge ceiling | 25.2V |
| Standard / maximum charge current | 6A / 12A |
| Discharge endpoint | 18.0V |
| Source discharge specification | 300A (25C), source performance figure; finished power-path rating must be agreed |
| Pack dimensions, maximum (L x W x T) | 185 x 83 x 55mm |
| Reference pack mass | 1535g |
| Wrapping | Black PVC |
| Power connection | XT90-S, 10AWG; final variant and polarity to be agreed |
| Balance interface | JST-XH, 7-position, 22AWG |
| Lead lengths | Main 165 ± 10mm; balance 75 ± 10mm |
| Operating temperature | Charge 0–45°C, 0.2C maximum at 0–10°C; discharge −10–60°C; apply additional current-specific limits |
Dimensions and connections
Technical views based on the dimensions in this product specification. Open either drawing to inspect the vector detail.
Use the low body height effectively
A 6S 12Ah LiPo battery with a 55mm-thick body can be evaluated where vertical clearance is limited. The other reference dimensions are 185mm length and 83mm width. Check strap pressure, foam support and cable clearance in the installed position before approving the mechanical fit.
Keep normal charging below the absolute limit
The 22.2V 12000mAh drone battery uses 25.2V as its normal charge ceiling. The 25.38V absolute limit is a separate boundary. Standard charging is 6A, with 12A listed as the maximum. Use the approved charge procedure instead of choosing a setting solely because the charger accepts a 6S label.
Plan for the longer main leads
For this low profile UAV battery, the drawing specifies 165 ± 10mm power leads. Support the extra cable so it does not rub an airframe edge or pull at the pack exit. The white seven-position balance connection has a shorter 75 ± 10mm lead and should remain identifiable during charging.
Identify the 22.2V version at receiving
The JS8880165 6S battery is a black-wrapped 1535g reference with 266.4Wh nominal energy. It differs from the 29.6V product in the same model family. Retain the 6S identity on sample records and review the source 300A statement against the actual XT90-S, 10AWG harness and operating conditions.
Related production and handling
The workshop view provides context for handling wired pouch assemblies. The finished 6S product should be checked separately for its low-profile body, insulation and specified lead lengths.
Request a Configuration Review
Include a drawing of the available 6S battery bay when requesting this 12Ah pack. The 55mm body thickness, restraint position and connector space are useful first checks for a sample quotation.
Compare 6S 12000mAh 25C UAV Battery with related models
| Selection point | 6S 12000mAh 25C UAV Battery | 8S 12000mAh 25C UAV Battery | 8S 16000mAh 25C UAV Battery |
|---|---|---|---|
| Nominal voltage | 22.2V | 29.6V | 29.6V |
| Rated capacity | 12Ah | 12Ah | 16Ah |
| Nominal energy | 266.4Wh (calculated from nominal voltage and rated capacity) | 355.2Wh (calculated from nominal voltage and rated capacity) | 473.6Wh (calculated from nominal voltage and rated capacity) |
| Pack dimensions, maximum (L x W x T) | 185 x 83 x 55mm | 185 x 83 x 75mm | 190 x 83 x 97mm |
FAQ
How low is the reference pack body?
Maximum thickness is 55mm. The complete installation must also allow the leads, plugs and mounting arrangement.
What is the normal charge voltage?
Use the approved 25.2V profile for this reference. The 25.38V absolute value is not the normal charging target.
Does the 25C label settle the connector limit?
It does not. Confirm the permissible load through the selected XT90-S connection and 10AWG leads under the intended thermal and duty conditions.
How should a bulk enquiry identify this product?
Specify the 22.2V 6S version, desired quantity, connector requirement and destination. The same cell family also has an 8S pack, so voltage must accompany capacity.
