NEW JOURNEY
Product Description
The 6S 3200mAh FPV Battery has a 135 x 45 x 38mm body and a smaller energy reserve than the 4200mAh option. That may change the mass distribution and intended session length, but it does not establish a compatible aircraft by itself. The 70C label converts arithmetically to 224A; acceptable continuous and peak currents still require finished-assembly evidence.
What the 70C Marking Establishes
For the 6S 3200mAh LiPo battery, the 70C marking is a product rate reference. Multiplying 3.2Ah by 70C gives 224A, but this calculation is not a validated finished-pack current limit. Selection requires an applicable continuous rating and a defined peak duration for the chosen assembly.
Technical Specifications
| Parameter | Specification |
|---|---|
| Reference configuration | 6S3200HV3-70C |
| Battery type | 6S lithium polymer battery pack |
| Configuration | 6S1P |
| Nominal voltage | 22.2V |
| Nominal capacity | 3200mAh |
| Nominal energy | 71.04Wh |
| Discharge rate shown on product | 70C |
| Arithmetic current reference | 224A (3.2Ah x 70C); not a verified continuous-current limit |
| Pack weight | Approx. 456g |
| Pack size (L x W x H) | 135 x 45 x 38 mm |
| Power connector | High-current power connector shown in product image; final mating interface confirmed before production |
| Balance connector | 6S multi-pin balance connector shown; final mating interface confirmed before order approval |
| Charge method | Matched 6S balance charging; exact charge profile confirmed for the approved battery configuration |
| Current approval | Continuous and peak ampere limits to be confirmed from finished-pack / project validation |
| Cycle-life reference | Approx. 200-400 cycles; near the end of this range, available capacity typically declines to about 80% of initial rated capacity under specified conditions |
Product Details
Mass and Landing Reserve
A 22.2V 3200mAh LiPo battery provides 71.04Wh nominal energy at approximately 456g. Aircraft power demand, payload and landing reserve determine useful duration. The battery position also affects centre of gravity, so a capacity comparison should keep the planned mounting arrangement and allowable takeoff mass in view.
Battery Mounting
The 70C LiPo battery reference body measures 135 x 45 x 38mm. Leave clearance for the power connection, balancing access and restraint straps. The battery body should carry mounting loads; the cables should remain free of tension throughout connection and removal.
Check performance under the intended duty
Record load duration and temperature as well as peak demand. Inspect cable strain relief and the connector mating pair during sample review; a current label does not describe every limit of the installed power system.
Production and Handling Context
Prepare a Product Enquiry
Send airframe layout, continuous current and peak-load duration to New Journey for a 6S 3200mAh FPV Battery quotation.
Compare 6S 3200mAh FPV Battery with related models
| Selection point | 6S 3200mAh FPV Battery | 6S 9000mAh FPV Battery | 6S 4200mAh FPV Battery |
|---|---|---|---|
| Nominal voltage | 22.2V | 23.7V | 22.2V |
| Nominal capacity | 3200mAh | 9000mAh | 4200mAh / 4.2Ah |
| Nominal energy | 71.04Wh | 213.3Wh | 93.24Wh |
| Pack weight | Approx. 456g | Approx. 824g | Approximately 574g |
FAQ
What should I compare before selecting 6S 3200mAh FPV Battery?
nominal voltage: 22.2V for this model, compared with 23.7V for 6S 9000mAh FPV Battery; nominal capacity: 3200mAh for this model, compared with 9000mAh for 6S 9000mAh FPV Battery.
What does the listed weight tell me about installation?
Pack weight: Approx. 456g. Weight alone does not define the battery envelope or mounting points. Obtain the external dimensions and retention drawing for the selected build before changing the aircraft battery bay. Include the terminal position and access needed to secure the battery.
Which connection details should be fixed for this battery?
Power connector: High-current power connector shown in product image; final mating interface confirmed before production; Balance connector: 6S multi-pin balance connector shown; final mating interface confirmed before order approval. Main power and balance connections serve different purposes. Keep the pinout and polarity tied to the ordered harness, and approve the connector and wire limits for the actual load; a matching plug shape is not a current rating.
What discharge limit should the equipment designer use?
Current approval: Continuous and peak ampere limits to be confirmed from finished-pack / project validation. A short-duration peak is not a sustained operating allowance. Retain the stated conditions when checking the operating load, connector and wiring.
