NEW JOURNEY
Product Description
The 11.1V 2000mAh Battery Pack uses three 18650 cells in series. Its 2000mAh capacity offers a small reserve, while the 6A discharge limit allows a separate assessment of load demand. Charging is limited to 1A in the supplied specification. The 9V recommended discharge cutoff is the normal design reference; the lower protection boundary should not become the routine operating target.
Cable and Connector
A 3S1P 18650 battery pack needs an exact connector part number or an approved mating sample, together with polarity, wire gauge and lead length. New Journey can review different terminals and cable interfaces for custom projects; the selected parts must be recorded in the approved order configuration.
Technical Specifications
| Item | Specification |
|---|---|
| Product Name | 11.1V 2000mAh Battery Pack |
| Brand | New Journey |
| Nominal Voltage | 11.1V |
| Rated Capacity | 2000mAh (2Ah) |
| Minimum Rated Capacity | 1950mAh (1.95Ah) |
| Nominal Energy | Approx. 22.2Wh, calculated from nominal voltage × rated capacity |
| Chemistry | NCM |
| Cell Format | 18650 |
| Series / Parallel | 3S1P |
| Housing Material | Heat-shrink film |
| Maximum Charge Current | 1A; 0.5C charging recommended |
| Maximum Continuous Discharge | 6A; 6A BMS rating |
| Charging Cut-off Voltage | 12.6V maximum |
| Discharge Cut-off Voltage | 7.8V minimum; 9V recommended |
| Cycle Life | >300 cycles with more than 80% initial cell capacity retained |
| Dimensions | Approx. 58 x 20 x 68mm |
| Weight | Approx. 0.15kg |
| Connector | Customized according to the approved equipment interface |
| Certification | To be confirmed for the target market and ordered configuration |
| OEM / ODM | Connector, lead, polarity, wrapping, label, protection and dimensions |
Product Details
Compact Body
The blue heat-shrink-wrapped pack measures approximately 58 x 20 x 68mm and weighs about 0.15kg. For an 11.1V 2Ah battery pack, the final drawing should confirm tolerance, wire exit and connector clearance before enclosure release.
Device Evaluation
This product may be considered for devices designed around an 11.1V rechargeable source, provided the electrical and mechanical requirements match. When evaluating an 11.1V 18650 battery pack, check that the normal load remains within the 6A continuous-discharge rating, the charger does not exceed 12.6V or 1A, and the equipment uses an appropriate discharge cut-off. Connector, polarity, compartment dimensions and operating environment must also be verified.
Check the device charge circuit
The selected 3S assembly requires a matching charging profile. Include polarity, protection and cable bend space in sample review, and record the agreed 6A continuous-discharge condition for the final configuration.
Production and Handling Context
Prepare a Product Enquiry
Send device operating range, charge-board data and mechanical drawing to New Journey for an 11.1V 2000mAh Battery Pack quotation.
Compare 11.1V 2000mAh Battery Pack with related models
| Selection point | 11.1V 2000mAh Battery Pack | 11.1V 10Ah Battery Pack | 11.1V 2600mAh Battery Pack |
|---|---|---|---|
| Nominal Voltage | 11.1V | 11.1V | 11.1V |
| Rated Capacity | 2000mAh (2Ah) | 10Ah | 2600mAh (2.6Ah) |
| Nominal Energy | Approx. 22.2Wh, calculated from nominal voltage × rated capacity | Approx. 111Wh, calculated from 11.1V x 10Ah | Approx. 28.86Wh |
| Chemistry | NCM | NCM | Lithium-ion (Li-ion) |
FAQ
What should I compare before selecting 11.1V 2000mAh Battery Pack?
rated capacity: 2000mAh (2Ah) for this model, compared with 10Ah for 11.1V 10Ah Battery Pack; nominal energy: Approx. 22.2Wh, calculated from nominal voltage × rated capacity for this model, compared with Approx. 111Wh, calculated from 11.1V x 10Ah for 11.1V 10Ah Battery Pack.
What charger information is needed for this battery?
Charging Cut-off Voltage: 12.6V maximum; Maximum Charge Current: 1A; 0.5C charging recommended. Match the charger profile, polarity and connection to the ordered assembly. A voltage-class label alone does not establish compatibility with an existing charger.
How much installation space should I allow for this battery?
Dimensions: Approx. 58 x 20 x 68mm; Weight: Approx. 0.15kg. Allow access to the terminals or connector and room for the cable bend and retention hardware. Compare the finished assembly drawing with the actual equipment space before fixing the mounting points.
Which connection details should be fixed for this battery?
Connector: Customized according to the approved equipment interface. The selected connector must match polarity, lead routing and the permitted load of the complete assembly. Where alternatives are listed, select the exact version in the order drawing.