NEW JOURNEY
Product Description
The low, long body is a key feature of the 72V 200Ah LiFePO4 Forklift Battery. Battery retention and the forklift’s required battery mass must be checked against the 125kg reference, even if the compartment dimensions fit. The charging system uses an 87.6V upper endpoint. A 315A peak is specified for 30 seconds and should be assessed separately from the 200A continuous duty.
Technical Specifications
| Specification | Reference Value |
|---|---|
| Product Voltage Class | 72V |
| Battery Chemistry | LiFePO4 |
| Reference Nominal Voltage | 76.8V |
| Nominal Capacity | 200Ah |
| Nominal Energy | 15.36kWh |
| Peak Charge Voltage | 87.6V |
| Discharge Cut-off Voltage | 60V |
| Standard Charge Current | 40A |
| Standard Full Charge Time | 5 hours |
| Max Charge Current | 200A (continuous) |
| Max Discharge Current | 200A (continuous) |
| Peak Discharge Current | 315A (30s) |
| Charge Temperature | 0-60°C |
| Discharge Temperature | -20-60°C |
| Dimensions (L x W x H) | 1138 x 410 x 253 mm |
| Weight | 125 kg |
| IP Rating | IP67 (reference specification) |
| Cycle Life | >6000 cycles at 80% DOD (reference condition) |
Product Details
Traction Current
Buyers comparing a 72V lithium forklift battery should check controller and load requirements before focusing on voltage alone. The reference configuration is rated for 200A continuous charge, 200A continuous discharge, and 315A peak discharge for 30 seconds. These values provide concrete inputs for evaluating drive, lift, acceleration, and short-duration surge demand.
Truck Integration
As a 72V forklift traction battery, this pack is best judged against the real truck architecture rather than by capacity alone. The buyer should compare the battery bay, retention method, terminal direction, cable routing, charger location, controller requirement, and the vehicle manufacturer’s permitted battery weight range.
Acceptance Records
A 72V industrial forklift battery order should identify the approved build and the acceptance checks for the truck application. Request records tied to that configuration; general workshop photographs alone do not establish model-specific test results.
Check the long enclosure in the truck
Receiving inspection should identify the 76.8V configuration and verify mounting points, dimensions and mass. Include cable clearance and the approved charging setup so a mechanically fitting pack is not assumed to be electrically compatible.
Production and Handling Context
Request a Configuration Review
Send forklift duty cycle, compartment drawing and required minimum battery mass to New Journey for a 72V 200Ah LiFePO4 Forklift Battery quotation.
FAQ
What should I compare before selecting 72V 200Ah LiFePO4 Forklift Battery?
Start with the Product Voltage Class, Battery Chemistry, Reference Nominal Voltage listed for this model. Send the application limits with your inquiry so the selected configuration can be checked against them.
What charging voltage and current are specified for this model?
Peak Charge Voltage: 87.6V; Standard Charge Current: 40A. Match the charger profile, polarity and connection to the ordered assembly. A voltage-class label alone does not establish compatibility with an existing charger.
How much installation space should I allow for this battery?
Dimensions (L x W x H): 1138 x 410 x 253 mm; Weight: 125 kg. A forklift battery also contributes to the truck installation and may be part of its counterweight requirement. The truck supplier must approve mass, restraint and terminal clearance together.
How should the forklift duty cycle use the two current ratings?
The reference states 200A continuous discharge and 315A peak for 30 seconds. Check sustained travel and repeated lifting loads against the continuous limit; the 30-second allowance cannot be treated as a full-shift rating.
