NEW JOURNEY
Product Description
The square footprint distinguishes the 12V 10Ah LiFePO4 Battery Pack from the wider 20Ah and 30Ah enclosures. Eight 26700 cells form its 4S2P architecture. It offers 128Wh nominal energy, so even when a load is within the current limit, the required operating duration still needs its own calculation. Charging uses the recommended 14.4V profile rather than an arbitrary lead-acid setting.
Technical Specifications
| Parameter | Reference Specification |
|---|---|
| Product Name | 12V 10Ah LiFePO4 Battery Pack |
| Brand | New Journey |
| Chemistry | LiFePO4 |
| Nominal Voltage | 12.8V |
| Rated Capacity | 10Ah |
| Minimum Rated Capacity | 9.5Ah |
| Nominal Energy | 128Wh (calculated from 12.8V × 10Ah) |
| Cell Format | 26700 LiFePO4 cylindrical cell, 5000mAh |
| Cell Configuration | 4S2P |
| Housing Material | Plastic housing |
| Standard Charge | 0.2C CC to 14.4V, then 14.4V CV until charge current declines to ≤0.05C |
| Reference Charge Time | Approx. 6 hours under the stated standard-charge method |
| Charging Cut-off Voltage | Source lists ≤14.6V; 14.4V recommended |
| Maximum Charge Current | 10A |
| Standard Discharge | 0.2C constant-current discharge to 10.4V |
| Discharge Cut-off Voltage | Source lists ≥8V; 10.4V recommended |
| Maximum Continuous Discharge | 20A reference; source notes this can be adjusted according to customer requirements |
| Peak Current | 30A reference; permitted peak duration not supplied |
| Cycle-Life Reference | ≥1000 cycles with remaining cell capacity above 80% of initial capacity; full cycle-test conditions not supplied |
| Operating Temperature | Charge: 0–55°C; Discharge: 0–55°C; supplied sheet also notes cell surface temperature ≤80°C during discharge |
| Storage Temperature | Less than 1 year: 0–25°C; less than 3 months: -10–45°C |
| Approx. Weight | 1.2kg, as stated in the supplied specification; confirm for final production SKU |
| Maximum Dimensions | 98 × 98 × 152mm (L × W × H), based on supplied Length / Width / Height values |
| Optional Communication | RS485, CAN, Bluetooth |
Product Details
Device Load Assessment
Small 12V loads can draw very different currents. For lighting or control electronics, the 128Wh nominal reserve helps assess operating duration; a motor or inverter also needs a startup-current review. The 20A continuous reference does not define the permitted duration of the separate 30A peak.
Existing Charger Compatibility
A 12V 10Ah lithium iron phosphate battery can be evaluated when a buyer wants to replace a small lead-acid unit, but a nominal-voltage match is only the first check. The supplied sheet uses a 14.4V CC/CV charge target, lists ≤14.6V as the charging cut-off and specifies 10A as the maximum charge current. For repeatable replacement projects, the existing charger, compartment, terminal positions, low-voltage behavior and load current should all be compared before sampling.
Check low-voltage behavior in the device
A pack-level cut-off can stop the equipment abruptly. Confirm that the host’s shutdown behavior and charger settings are suitable, then record the selected terminal arrangement and mechanical retention.
Production and Handling Context
Discuss the Sample and Order
Send device current, charge profile and connector polarity to New Journey for a 12V 10Ah LiFePO4 Battery Pack quotation.
FAQ
What should I compare before selecting 12V 10Ah LiFePO4 Battery Pack?
Start with the Product Name, Brand, Chemistry listed for this model. Send the application limits with your inquiry so the selected configuration can be checked against them.
Can I reuse a charger with this battery?
Charging Cut-off Voltage: Source lists ≤14.6V; 14.4V recommended; Standard Charge: 0.2C CC to 14.4V, then 14.4V CV until charge current declines to ≤0.05C. Match the charger profile, polarity and connection to the ordered assembly. A voltage-class label alone does not establish compatibility with an existing charger.
How much installation space should I allow for this battery?
Maximum Dimensions: 98 × 98 × 152mm (L × W × H), based on supplied Length / Width / Height values; Approx. Weight: 1.2kg, as stated in the supplied specification; confirm for final production SKU. Allow access to the terminals or connector and room for the cable bend and retention hardware. Compare the finished assembly drawing with the actual equipment space before fixing the mounting points.
What discharge limit should the equipment designer use?
Maximum Continuous Discharge: 20A reference; source notes this can be adjusted according to customer requirements; Peak Current: 30A reference; permitted peak duration not supplied. A short-duration peak is not a sustained operating allowance. Retain the stated conditions when checking the operating load, connector and wiring.